Recently serviced, cleaned, flushed, fresh compressor oil.
Runs good.
John in Eagle River by Fred Meyers ak text 242-83two4.
This older pc2001 model has been superseded by the pc1131 now.
They run between 5 and 6 hundred new.
Thank you.
(I did a complete tear down of this unit!, not just a rag wipe). (Repaired damaged connector rod journal due to lack of oil)
Technician Serviced.
Make an offer.
I will also rent it for 40 bucks a day, collateral or cash security deposit or something like that. 15 amp breaker should run it , 16 ga. Extension cord to 50 feet, 14 ga extension cord to 100 feet, but I use my 16 ga. 100 footer even though I shouldn't, I let it rest. (Cool) 40% duty cycle.
I also have air lines available, I have not figured out what to sell it with, I have a yellow coil hose you can have to get you going.
It reaches about 20 feet, 15 for sure.
Update: ran it up to 85 psi, there was a pin hole in the bottom of the lower air tank, so I plugged it with a fine thread sheet metal screw and rubber washer, holding good at 100 psi.
I will turn the kick out down to a minimum setting, as pictured, the pump is running great and charges fast!
I have it set at kick in 55 and kick out 80 psi as that suits my current work, he had it set at framing nailer pressures. Pressure switch adjustment is very nice with a very wide range of pressures available via the adjustment screws.